Mario Kart X Ring Fit Adventure

Blue Shells never felt so satisfying

Jog into First place with the Ring Fit Mario Kart Mod

Picture
To be totally honest with y'all, I actually dislike Mario Kart. I think it's because it hates me. Why do I only get bananas in 8th place??? Either way, here's a ring fit mod for Mario Kart. This is a really good workout as this requires the player to run-in-place to go forward. It actually feels really natural and great.

Hardware needed to Play

Here's the following hardware you need for this version of the mod:
  • Titan Two - Amazon Link ($95)
    • ​The Titan Two is an input converter. This is what you'll need to run my script! It's a little hard to come by now-and-days due to COVID-19
  • Titan Two Wireless Expansion Kit - Amazon ($45)
  • RingCon and Leg Strap (Not Required) - Amazon ($80)
    • If you can get one awesome. If not, it's fine! You really just need the legstrap, you can just punch with the other joycon for the same results.

Current Version: 1.1

 Message me on twitter (@SuperLouis_64) if there are any big issues.  I can work on a version that does not require the ringfit if needed!

Download Script for the Titan Two:
What this version does:
  • Running presses the acceleration button. Run = Drive
  • Squeezing Ringcon let's you use items​

Controller Bending Episode: 6 Running in the Mario Kart

​If you came from the video, here's a text version on how to use the RingFit Controller Mod for your Switch. Let's get right into it.

Setting Up the Titan Two
Before starting the mod, you'll need to load my .gcp script onto the Titan Two. Make SURE you have the wireless Expansion kit installed onto the titan two or you're going to have a bad time.
  1. Install and open the GtunerIV software onto your PC
  2. Connect your Titan Two to your PC
    1. Use the PROG USB slot
  3. On the GTunerIV, Open the .gpc file downloaded from the top of this page​ 
  4. Click on the "Install active work to memory Slot" (green arrow pointing down into a slot) and move the .gpc to a memory slot
    1. This is the slot you must change to on the Titan Two​
You should be ready to now plug in the Titan Two into the Nintendo Switch!

Picture
What GTunerIV Looks like
Picture
Use this to load my script onto your titan Two!
Connecting the Titan Two to your Nintendo Switch​
Here's how you can connect your converter to your switch. If you need more information, go to the Titan Two's Switch Webpage.
  1. Turn on the "Pro Controller Wired Communication" for your Nintendo Switch
    1. Navigate to your Switch's System Settings
    2. Navigate to the section labeled "Controllers and Sensors"
    3. Locate the "Pro Controller Wired Communication" option and turn it on
  2. Connect your Titan Two to your Nintendo Switch
    1. Use the OUTPUT port ​
  3. Press and hold the Titan Two's UP button (arrow to the left of the LED)
  4. On Each Joycon, press and hold the Sync button until they activate
    1. Once Synced, connect the joycons to the Leg strap and the RingCon
  5. On the Titan Two, press the Up or Down button until the LED reflects the number the script was loaded on to.
  6. Hooray! Now you can play any game with my script! (It works for BotW, have fun using it for any other game because it may not work)
If you need any assistance, always feel free to message me on twitter: @Super_Louis64
Below is a picture guide for the steps above!

Plans for the Future: Version 2.0?

Overall I don't really have any plans for the mod! If you need things tweaked message me on twitter: @SuperLouis_64

Thanks for the Support! Check out another Youtube video if you want: