Animal Crossing X Ring Fit AdventurePay your Debt off, one squat at a time
|
Run to new Horizons with this Exercise Mod for Animal Crossing

With the release of Animal crossing, I've never felt so calm in my life. Who knew paying off debt and owning a home can be experienced in a game??? After a good amount of viewer requests I finally got around to making Animal Crossing more realistic. With this mod you'll be able to exercise and collect bells at the same time! This time around, the mod will support players who don't own the Ring-con, which has been price gouged lately.
Hardware needed to PlayHere's the following hardware you need for this version of the mod:
|
Current Version: 1.0There are two files for the mod! One file supports the Ringcon, the other expects the user not to have one. There's little difference between the two's inputs. Definitely message me on twitter (@SuperLouis_64) if there are any big issues.
Download Script for the Titan Two:
What this version does:
|
|
|
Controller Bending Episode: 9 Animal Crossing, Exercise Horizons
If you came from the video, here's a text version on how to use the RingFit Controller Mod for your Switch. Let's get right into it.
Setting Up the Titan Two
Before starting the mod, you'll need to load my .gcp script onto the Titan Two. Make SURE you have the wireless Expansion kit installed onto the titan two or you're going to have a bad time.
Setting Up the Titan Two
Before starting the mod, you'll need to load my .gcp script onto the Titan Two. Make SURE you have the wireless Expansion kit installed onto the titan two or you're going to have a bad time.
- Install and open the GtunerIV software onto your PC
- Connect your Titan Two to your PC
- Use the PROG USB slot
- On the GTunerIV, Open the .gpc file downloaded from the top of this page
- Click on the "Install active work to memory Slot" (green arrow pointing down into a slot) and move the .gpc to a memory slot
- This is the slot you must change to on the Titan Two
Connecting the Titan Two to your Nintendo Switch
Here's how you can connect your converter to your switch. If you need more information, go to the Titan Two's Switch Webpage.
Below is a picture guide for the steps above!
Here's how you can connect your converter to your switch. If you need more information, go to the Titan Two's Switch Webpage.
- Turn on the "Pro Controller Wired Communication" for your Nintendo Switch
- Navigate to your Switch's System Settings
- Navigate to the section labeled "Controllers and Sensors"
- Locate the "Pro Controller Wired Communication" option and turn it on
- Connect your Titan Two to your Nintendo Switch
- Use the OUTPUT port
- Connect the Bluetooth Adapter to the Titan Two
- Press and hold the Titan Two's UP button (arrow to the left of the LED)
- On Each Joycon, press and hold the Sync button until they activate
- Once Synced, connect the joycons to the Leg strap and the RingCon
- On the Titan Two, press the Up or Down button until the LED reflects the number the script was loaded on to.
- Hooray! Now you can play any game with my script! (It works for BotW, have fun using it for any other game because it may not work)
Below is a picture guide for the steps above!
Plans for the Future: Version 2.0?
There are some bugs in this version of the mod:
Thanks for the Support! Check out another Youtube video if you want:
- Find a better squat button
- Currently you cannot use reactions with my mod
- RingCon Squeeze kind of sucks
- Since I do not have access to the flex sensor, it
- Since I do not have access to the flex sensor, it
Thanks for the Support! Check out another Youtube video if you want: